i-1
i Important Safety Information
ڦ
Do not install this instrument in a location where explosives or
inflammable substances are used or stored. Otherwise, fire or
explosion may occur.
ڦ
Do not remove the cover of the instrument.
exposed to high voltage sections.
ڦ
Do not disassemble or modify the instrument.
exposed to high voltage sections.
ڦ
Disconnect the power cord from the instrument before servicing
the instrument. Otherwise, you may get an electric shock.
ڦ
Do not commence service or main
tenance work while the instrument is
being used for a patient.
ڦ
Do not place water or chemicals on the instrument.
chemicals entering the instrument may cause an electric shock or
failure.
ڦ
Only use the specified terminal for connection of the instrument.
Using another type of terminal may result in failure of the
instrument.
ڦ
This instrument is a
measuring device specially designed for
ophthalmology.
Never use the instrument for other purposes.
ڦ
The external output terminal is not isolated from the internal circuit.
Inappropriate wiring may damage the internal circuit.
before using the external output terminal.
To Next Page
Loading...
Need help?
General
