TOMLOV DM03 - Connecting and Using with Mac;iMac (Photo Booth)

-18-
E-mail: support@tomlov.com
(2) Work with Mac/iMac
Option 1: Run Photo Booth
① Make sure your MacBook has "Photo Booth". If not, please install it
from App Store.
② Connect the digital microscope to the computer with the USB cable
(You may need a USB hub).
③ Then power on the microscope, the microscope will display
“Mass Storage”, “PC Camera” and “Charging Mode”, select
“PC Camera” and confirm.
④ Launch "Photo Booth" (Finder > Application > Photo Booth) and
select "USB PHY 2.0 (Default)" from "Camera" menu bar.
Mass Storage
PC Camera
Charging Mode