Tommy Bahama CABRILLO COVE

Questions and Answers

D
Derrick MorrisAug 2, 2025
Why Tommy Bahama Fan will not start?
- W
  woodraymondAug 2, 2025
  If your Tommy Bahama Fan won't start, here's what to check: * **Blown fuse or circuit breaker:** Examine the main and branch circuit fuses or circuit breakers. * **Loose wiring:** Check the power line connections to the fan and the switch wire connections in the switch housing. * **Wall switch:** Ensure the wall switch is turned on. * **Remote:** Program the remote and receiver according to the owner's manual.
C
Catherine CochranAug 8, 2025
What to do if Tommy Bahama Fan wobbles excessively?
- S
  Sara JamesAug 9, 2025
  If your Tommy Bahama fan wobbles a lot, try these solutions: 1. **Setscrews in motor coupling:** Raise the coupling cover and tighten the setscrew securely. 2. **Setscrew in hanger ball/downrod assembly:** Tighten the setscrew. 3. **Screws securing fan blade holders to motor:** Check that these screws are tight. 4. **Fan blade holders:** Ensure the fan blade holders are seated firmly on the motor. 5. **Hanger bracket and/or ceiling outlet box:** Tighten the hanger bracket screws to the outlet box, and/or secure the outlet box. 6. **Fan blades:** Interchanging an adjacent blade pair can redistribute weight. Alternatively, use the supplied balancing kit.
M
Michael MorganAug 16, 2025
How to fix a noisy Tommy Bahama Fan?
- M
  Melanie BrownAug 16, 2025
  If your Tommy Bahama fan is making noise, consider the following: * **Blades:** Attach blades to the fan before operating. * **Screws securing fan blade holders:** Check that the screws attaching the blade holders to the motor are tight. * **Wire connectors:** Make sure wire connectors in the switch housing are not rattling against each other or the housing's interior. * **Screws holding blades:** Tighten these screws securely. * **Screws in motor housing:** Ensure all screws in the motor housing are snug (not over-tight). * **Hanger bracket:** Check the hanger bracket mounting screws for tightness.
V
vcervantesAug 25, 2025
What to do if all three lamps of Tommy Bahama Fan will not illuminate?
- M
  Matthew HernandezAug 25, 2025
  If all three lamps on your Tommy Bahama fan won't light up: * **Electrical connectors:** Turn off power at the fuse box or breaker panel and check the receiver electrical connectors for proper installation. * **Remote battery:** Replace the 9-volt battery in the remote control. * **Lamps:** Replace the lamps.