CHARGER SAFETY INFORMATION
- The charger should only be used indoors in a cool, dry, ventilated area, on a flat, stable, hard
surface.
- Avoid charger contact with liquids, dirt, debris, or metal objects. DO NOT cover the charger while
in use.
- Store and use the charger in a safe place away from children.
- Fully charging the battery before each use can help extend the life of the battery and reduces the
chance of over-discharging.
- DO NOT charge the battery with any chargers other than the one with your e-bike purchased
directly from Tomofree.
- The charger works on 110/240V 50/60 Hz standard home AC power outlets and automatically
detects and accounts for incoming voltage. DO NOT open the charger or modify voltage input.
- DO NOT yank or pull on the cables of the charger. When unplugging carefully remove both the
AC and DC cables by pulling on the plastic plugs directly, and not on the cables.
- The charger is expected to get relatively warmer as it charged. If the charger gets too hot to
touch, you notice a strange smell, or any other indicator of overheating, discontinue using the
charger and contact Tomofree Support.
Charge the battery only with the charger originally supplied with the
bike from Tomofree, or a charger purchased directly from Tomofree.
Never use an aftermarket charger, which can result in damage, serious
injury, or death.
Failure to follow proper charging procedures can result in damage to
your e-bike, the charger, or personal property, and/or cause serious
injury or death.
To Next Page
Loading...