TomTom Navigator Navigator 3 User Manual

These properties define which five buttons are offered on the Navigator pop-up
menu (the sixth button is always the "More" button).
Navigator menu: More
These properties define which buttons appear on the second and third
Navigator pop-up menu.
POI settings
Enable POI
quick-
menu
Enables the "quick-select" pop-up menu showing the five
"most important" Points of interest categories.
Poi Menu
Items 1-4
The first four "most important" Point of interest
categories (the fifth will always be set to the most
recently selected Point of interest category)
Maximum
POI on
map
Controls the maximum number of Points of interest that
are displayed on a map simultaneously. The default is
20.
Changing the function of the hardware buttons
These properties define the behaviour of each of the hardware buttons of your
Pocket PC when you are navigating.
6. The GPS Status
In order to use TomTom Navigator for turn-by-turn navigation you need to have a working
connection between your Pocket PC and your GPS receiver. The GPS Status view provides access to
GPS receiver information and settings. Choose "GPS Status..." from the "File" menu or from the
Navigator pop-up menu to access the GPS Status. You can choose from three tabs:
Status
Displays your current position, speed, direction and the GPS time (UTC/
GMT). With most GPS receivers the position of the satellites used to
establish your position is displayed as well as the signal strength. A
moving indicator
signifies whether there is a working link
between your Pocket PC and your GPS receiver.

TomTom Navigator Navigator 3 Specifications

General

Brand	TomTom
Model	Navigator Navigator 3
Category	GPS
Language	English