TomTom ONE User Manual

56
The locations of cameras you report are reported when you next connect your
device to TomTom HOME.
Reporting a new safety camera while at home
You do not need to be at the location of a safety camera to report the new loca-
tion.
To report a new safety camera location while you are at home, do the follow-
ing:
1. Tap Services in the Main Menu on your device.
2. Tap Safety Alerts.
3. Tap Report safety camera.
4. Tap Fixed camera or Mobile camera depending upon the type of safety
camera.
5. Find the location of the camera you want to report using the Map browser.
Use the cursor to mark the exact location, then tap Done.
6. Tap on the type of camera you want to report and if necessary, the speed
restriction for the camera.
Reporting incorrect camera alerts
You may receive an alert for a camera that is no longer there.
To report an incorrect camera alert, do the following:
1. While you are at the location of the missing camera, tap Report in the Driv-
ing View.
Note: This must be done within 20 seconds of receiving the camera alert.
2. Tap Remove.
The next time you connect your device to TomTom HOME, the camera alert
is reported as incorrect.
Types of fixed safety camera you can report
When you report a fixed safety camera, you can select the type of fixed cam-
era you are reporting.
These are the different types of fixed safety camera:
Speed camera
This type of safety camera checks the speed of passing vehicles.
Traffic light
camera
This type of safety camera checks for vehicles breaking traffic rules at traffic
lights.

TomTom ONE Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Display resolution	480 x 272 pixels
Display number of colors	65536 colors
Display size (HxV) (imperial)	4.3 \
Internal memory	1024 MB
Processor frequency	266 MHz
Bluetooth version	2.0+EDR
Battery life (max)	2 h
Operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Depth	27 mm
Width	119 mm
Height	86 mm
Weight	208 g