TomTom RIDER User Guide

10
Tap YES to enter an arrival time. Your RIDER shows you whether you will
arrive on time. For more information, see Arrival times on page 10.
The route is then calculated by your TomTom RIDER.
9. When the route has been calculated, tap Done.
TomTom RIDER will immediately start guiding you to your destination with
spoken instructions and visual instructions on the screen.
You should plan your route before you start driving. It is not possible to plan
the route in this much detail once you start moving. While you are driving,
only the driving menu is displayed. For more information, see this chapter:
Menus on page 15.
Note: Before you can plan a route in this way, TomTom RIDER must first
locate your current position.
Arrival times
When you plan a route, your RIDER asks you if you need to arrive by a
particular time:
Tap YES to enter an arrival time.
Your RIDER calculates your arrival time and shows you whether you will arrive
on time.
You can also use this information to work out when you need to leave. If your
RIDER shows you that you will arrive 30 minutes early, you can wait and leave
in 30 minutes time, rather than arrive early.
Your arrival time is constantly recalculated during your trip. The status bar
shows whether you will arrive on time or late, as shown below:
You will arrive 55 minutes before the arrival time you entered.
If the estimated arrival time is more than five minutes before
the time you entered, it is shown in green.

TomTom RIDER Specifications

General

Marine (chartplotters, sounders)	No
Languages support	Multi
Map coverage	All Europe
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Native aspect ratio	4:3
Storage media type	Flash
Compatible memory cards	Not supported
Form factor	Fixed
Product color	Black
Text-to-speech message reader	-
USB 2.0 ports quantity	1
Power source type	Battery
Battery life (max)	6 h

Weight and Dimensions

Depth	53 mm
Width	130 mm
Height	101 mm
Weight	353 g