TomTom RIDER User Guide

Using your TomTom RIDER2.
4
Using your TomTom RIDER
Switching on
1. Open the compartment on the bottom of your TomTom RIDER.
2. Push the memory card into the memory card slot.
3. Press and hold the On/Off button for 2 seconds, or until your
TomTom RIDER starts.
The first time you switch on your TomTom RIDER, it may take up to 20
seconds to start. To switch off your TomTom RIDER, press and hold the On/
Off button for 2 seconds.
Setting up
First, you have to answer a few questions to set up your device and your
Cardo scala-rider™ headset. Answer the questions by tapping the screen. You
will use the touchscreen for everything you do with your TomTom RIDER.
Follow the instructions to establish a Bluetooth connection between your
TomTom RIDER and your Cardo scala-rider™ headset.
Once you have answered the questions, your TomTom RIDER will display the
Driving View.
The screen is shown in black and white until your TomTom RIDER locates
your current position. Once this is done, the Driving View is shown in full
color.

TomTom RIDER Specifications

General

Marine (chartplotters, sounders)	No
Languages support	Multi
Map coverage	All Europe
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Native aspect ratio	4:3
Storage media type	Flash
Compatible memory cards	Not supported
Form factor	Fixed
Product color	Black
Text-to-speech message reader	-
USB 2.0 ports quantity	1
Power source type	Battery
Battery life (max)	6 h

Weight and Dimensions

Depth	53 mm
Width	130 mm
Height	101 mm
Weight	353 g