Tomy Verbot - Arm Adjustment

CHECKLIST CORRECTING DISORDERS
COMPLAINT
CAUSE
Verbot does not move.
1. The switch (es) is turned OFF.
2. No words have been programmed
into
Verbot.
3. The transmitting distance is too far.
4. The batteries are running low.
Verbot can not carry 1. The arms have slipped out of place.
an object.
2. The arms are positioned too high.
3. The arms are positioned too
low.
4. The object is too
If after consulting "Checklist for Correcting Disorders" a
problem still exists, CALL US. Do not return the
unless asked to do so.
TOLL FREE
# 800 421-5597
CALIFORNIA RESIDENTS CALL 800 421-8496
CHECK
1. Turn both switches ON.
2. Program Verbot with the Memory
Buttons.
3. Get
closer-transmitting should be
within
an unobstructed 12 foot radius.
4. Replace the batteries with new ones.
(Refer to section on Battery
Replacement) .
1. Refer to the section on Arm
Adjustment.
15