-
BEFORE PROGRAMMING VERBOT, READ ALL
OPERATING INSTRUCTIONS.
1.
Verbot is programmed by pressing Memory Buttons
and entering commands. Under each Memory Button is
a
small picture of Verbot's function. (See picture below,
FIG.
1)
You
will need to program a separate Command
Word (or words) for each Memory Button.
D
IlIbSTOPdIt
~~
Verbot stops
the motion
D
~
Eyes flash with I Hands grab
talking sound & arms lift
o
Arms descend
& hands let go
D 0
01,-----,
¢:I~l,l.
,~c:>
()~\I
Verbot moves I Moves I Verbot rotates
forward backward to left
Rotates
FIG.1
U~I:KAIIU~
Choose Command Words that are very short, 2
or
3
syllables at the most.
THE
GOLDEN RULE: COMMANDS MUST BE
AT
LEAST .2 SECONDS LONG,
BUT NOT LONGER THAN 1.2
SECONDS. IF
YOU
PROGRAM
A COMMAND LONGER THAN
1.2 SECONDS, VERBOT WILL
AUTOMATICALLY ERASE
IT.
Also, Command Words should sound very different
from each other. For example, don't use
"Turn Left" as
one command, if you're going to use
"Turn Right" as
another. They sound too much alike to Verbot, and he
may confuse them. ("Rotate
Left" and "Turn Right"
would be good chOices.)
(Continued)
i
To Next Page
Loading...
