4.
Follow steps
A,
Band
C to program Verbot:
A.
Hold the first Memory Button (the "STOP" Button)
down
(FIG. 6). The Memory Light will begin
flashing. While the Memory
Ught flashes, speak
into the Voice Transmitter's microphone
(FIG. 7).
Say the Command Word
(s)
that you want Verbot to
memorize (such
as
"STOP BOY!" or "STAY"). Keep
your voice
loud, speak clearly, and hold the Voice
Transmitter 3-6 inches from your mouth.
~
vr
IiiiiBnM
I
I"
I 'til
"V''IIII#'
1'tII
l1li
,."
,
B.
Once Verbot memorizes the word, the Memory
Light
will stop flashing and stay on. If the Light
ccntinues to flash, press the Memory Button down
again and repeat the Command.
Once the Light
stays on, the word is programmed. Release the
Memory Button to
let the Light go off.
C.
Follow steps A and B with each of the remaining
Memory Buttons.
YOU
WILL FIND BLANK PROGRAMMING
CHARTS
ON
THE BACK COVER OF THE
MANUAL.
FILL THEM
IN
TO
HELP
YOU
REMEMBER YOUR COMMAND WORDS.
(Continued)
9
To Next Page
Loading...
