2.Frequency Pairing:
After turning on the remote controller and the drone, push the left
joystick forwards and downwards successively. The drone LED
lights stably, wait for a few second, the drone is ready to fly.
1. Put aircraft in horizontal plane, Push
the left and right joysticks to down
right corner as the picture shows.
1. Put aircraft in horizontal plane, Push
the left and right joysticks to down
right corner as the picture shows.
2. Pull the left joystick forwards slowly,
the drone will fly up.
2. Press the "One-button Take off / Land"
button to take off the drone.
Slowly push down the throttle joystick
until the drone lands. Keep the
throttle joystick in the lowest position
for 3 seconds. The motor stops and
the drone lands successfully.
Press the “One-button Take off /
land" button and the aircraft will
descend automatically.
When the aircraft encountered
obstacles or emergency, long press
the emergency landing button for 3
seconds, the aircraft can be
emergency landing.
LANDING METHOD EMERGENCY LANDING
Take off method 1
Take off method 2
1. Press the power button to start the
remote control.
Make sure the propeller is installed correctly and fastened.
To Next Page
Loading...
