The blades are not running
Motors are not running
The drone always
turns right
The drone is still moving
forward when hovering
after fine tuning
Gyroscope not in
horizontal position
Do the fine tuning after
drone is hovering stably
The fine-tuning adjustment
needs to be done
Do the fine-tuning adjustment
Damaged main blade
Damaged motor
Replace main blade
Replace the motor
The throttle stick isn’t pulled
to the end to complete
pairing frequency and the
Drone automatically rise
Throttle stick should be pulled to
the end during pairing frequency
Control distance beyond
60m(without interference)
The blade A and blade B are
installed mistakenly.
Drone battery power is
depleted.
Get stuck with somthing
The blade A and blade B should be
installed correctly.
Take out the objects that stuck in
the motors
To Next Page
Loading...
