2. Connect the battery to the drone and turn on the drone. The LED
on the drone will flash.
3. Place the drone down on a flat surface, and make sure that the
head of the drone is facing the front and the tail facing the rear
(player).
4. When the left stick of the remote control is pushed up to the top,
the remote control will give a "beep" sound(as shown in 01).
When the left stick of the remote control is pulled down to the
bottom, the buzzer will give a long "beep" (as shown in 02).
Pairing is complete once the drone lights & controller lights stop
flashing.
- 10 -
01
02
EN
To Next Page
Loading...
