When the flight of the drone is unstable or deviated from the left and
right after take-off, the consumer can calibrate the gyroscope and
the flight will be more stable after the calibration.
1. Turn on the drone and controller, place the drone on a flat ground
(it is very important).
2. Then push left throttle of the controller to the left-down corner (7
o'clock direction) and right throttle to the right-down corner (5
o'clock direction) at the same time and hold for few seconds
during which the LEDs will blink. Then, the drone will be ready to
fly again.
Calibration
- 15 -
EN
To Next Page
Loading...
