4
1.
Tone Bliss
Tone BlissTone Bliss
Tone Bliss
amplifiers
Congratulations ! You have just acquired a
Tone Bliss
amplifier, a true masterpiece of quality
and durability. Like all
Tone Bliss
amps, the
Crunch Machine
:
Is 100% handmade in Europe
Uses only highest-quality components
Is end-to-end managed by
Tone Bliss:
design, manufacturing, tests etc… are all
performed by
Tone Bliss
.
2. General warning
Thanks for thoroughly respecting the following guidelines in order to ensure a safe and durable
operation of your amplifier:
Place your amplifier on a stable surface and in an ventilated place.
Do not expose the amplifier to moist or liquids.
Do not open the amplifier on your own. If you encounter a technical problem, contact
Tone Bliss
Connect your amplifier exclusively to an earthed power outlet (230VAC).
Never power your amplifier before having connected a load (speaker or power
attenuator).
Always connect your load to the speaker outputs [18] connector showing the same
impedance: connecting the amplifier to a mismatched load can damage the amplifier.
Systematically wait 5 mn before switching the standby [3] switch in the Home or Stage
position. This allows the tubes to heat-up and reach their operating conditions. For more
details, please go to chapter 4.2 Power-up.
To Next Page
Loading...