TONOR K380T - User Manual

13
11
12
SET
UHF
1.Power key：Press to switch on,
press and hold to switch off
2.Frequency conversion button：press after
power on to convert from CH01 to CH10
3.Battery level：automatically power off
when the battery charge level is over low
4.Wireless signal strength
5.Current working channel
6.D6.5mm audio plug
7.CHARGE : Charging indicator
8.BT : Bluetooth indicator
9. ：Microphone connection
indicator
10.PAIR: Bluetooth paring button
11.Power switch
12.USB charging port
13.Battery cover
User Manual
Model:K380T
Wireless Microphone
Product Introduction
Prompt：Reverse installation of the microphone and receiver batteries is strictly
forbidden. Otherwise, it will lead to the machine burnout.
Hand-held microphone--------
Receiver----------------------
Manual---------------------------1
USB charging cable------------1
Antiskid ring--------------------1
----1
---1
Packaging List
1
7
8
9
10

Summary

Product Introduction

Microphone Components and Indicators

Details on the microphone's power, channel, signal strength, and audio plug.

Receiver Components and Indicators

Details on the receiver's charging, Bluetooth, connection, power, and ports.

Packaging List

Steps for Using

Receiver Setup

Instructions for installing the receiver battery and switching it on.

Microphone Setup

Instructions for installing the microphone battery and switching it on.

Connecting and Pairing

Steps for connecting the microphone to an audio system and pairing via Bluetooth.

Technical Parameters

Troubleshooting

Microphone Not Turning On

Diagnosing issues when the microphone fails to power up.

Receiver Light Not On

Troubleshooting the receiver's power indicator not illuminating.

Microphone Squealing

Resolving audio feedback or squealing from the microphone.

Signal Interference

Addressing issues caused by interference from similar frequencies.

TONOR K380T Specifications

General

Type	Condenser
Polar Pattern	Cardioid
Frequency Response	20Hz - 20kHz
Connectivity	Wired
Accessories	Foam Mic Cover