What to do if the Tool it Motorcycle Accessories filter stays dark?
If the Tool it Motorcycle Accessories filter stays dark, first, check and clean the detectors. If the issue persists, adjust the sensitivity knob to the lowest position. Also, if the ambient light around the welding area is extremely bright, it is recommended to reduce the light level.
What to do if Tool it Motorcycle Accessories filter darkens and then lightens during welding?
If the Tool it Motorcycle Accessories filter darkens and then lightens while welding, try adjusting the sensitivity to a higher setting.
Why is my Tool it LCD SPACE 11 TRUE COLOR flickering?
Ensure that the arc sensors on your Tool it Motorcycle Accessories are not blocked, allowing direct access to the arc light.
How to fix optoelectronic filter on Tool it Motorcycle Accessories?
To solve the problem with the optoelectronic filter of your Tool it Motorcycle Accessories, activate the solar charge by exposing the cell to light for 20 to 30 minutes.
Why is the side of my Tool it LCD SPACE 11 TRUE COLOR Motorcycle Accessories filter lighter?
The lighter side of the filter compared to the center is a natural feature of LCDs and not dangerous for the eyes. However, for maximum comfort with your Tool it Motorcycle Accessories, try to keep a viewing angle of around 90°.
General| Brand | Tool it |
|---|---|
| Model | LCD SPACE 11 TRUE COLOR |
| Category | Motorcycle Accessories |
| Language | English |
To Next Page
