Tool it PBT 700 - Battery Test Procedure; Select Battery Type; Select Battery Rating; Input Battery Capacity

17
PBT 700
EN
Original manual
BATTERY TEST:
1.SelectBATTERYTEST.Press«ENTER».
ANALYSEUR DU
SYSTÈME
2. Press the to select REGULAR/STD or START/STOP battery.
* REGULAR/STD BATTERY:
FLOODED, AGM FLAT PLATE, AGM SPIRAL, VRLA/GEL
* START/STOP BATTERY:
AGM FLAT PLATE, EFB
REGULAR/STD
START/STOP
3. Press the keytoselectthebatterytype:
BATTERY TYPE:
AGM FLAT PLATE
4.Press«ENTER»toconrmchoice.
5. Press the keytoselectthebatteryrating:CCA/SAE,EN,JIS,DIN,IEC,
& CA/MCA.
SELECT RATING:
CCA/SAE
6.Press«ENTER»toconrmchoice.
7. Press the keytoinputthebatterycapacity.
CCA/SAE: 40~2000
EN: 40~1885
DIN: 25~1120
IEC: 30~1320
JIS: By Battery Type No.
CA/MCA: 50~2400
SELECT CAPACITY:
560CCA/SAE
8. Press the keytoconrmtemperature.
AU-DESSUS DE
32 °F / 0 °C ?
OUI/NON
9. Press <<Enter>> to begin the test.
* Return Feature: Before the test is started, the user can always return to the previous setting
page by pressing <<ENTER>> for 2 seconds.