To Next PageTo Next Page
Need help?Do you have a question about the Tool it PBT 700 and is the answer not in the manual?
General| Brand | Tool it |
|---|---|
| Model | PBT 700 |
| Category | Test Equipment |
| Language | English |
Essential safety measures to follow when working with lead-acid batteries and the tester.
Steps to prepare the battery and testing environment before commencing a test.
General notes and cable verification process for operating the tester.
Actions to take before starting any battery test in a vehicle.
Accessing the system analyzer function from the main menu.
Initiating a battery test from the main menu option.
Starting a system test via the main menu.
Performing an in-vehicle test using the device.
Printing the most recent test result from the device.
Changing the display language of the tester.
Viewing the number of tests performed.
Setting the device's date and time parameters.
Adjusting the screen brightness level.
Editing customized information on the device.
Selecting the appropriate battery type for the test.
Choosing the battery's rating standard (e.g., CCA/SAE, EN).
Entering the battery's capacity value.
Confirming the ambient temperature for accurate testing.
Initiating the battery test sequence.
Instructions for removing surface charge when testing within a vehicle.
Instructions for removing surface charge when testing outside a vehicle.
Understanding the initial test results like voltage and resistance.
Interpreting results indicating a good battery needing recharge.
Action for batteries that are discharged and require retesting.
Identifying batteries that need immediate replacement.
Diagnosing batteries with short-circuited cells.
Troubleshooting errors related to large capacity or connection issues.
Option to print the test results.
Assessing the vehicle's cranking voltage draw.
Evaluating alternator output at idle without accessories.
Evaluating alternator output with accessories and engine loads.
Checking for diode functionality in the alternator.
Final results of the system test including loads and engine status.
