To Next PageTo Next Page
Need help?Do you have a question about the toolport PROFESSIONAL Series and is the answer not in the manual?
General| Type | Party Tent |
|---|---|
| Material | Polyester |
| Waterproof | Yes |
| UV Protection | Yes |
| Warranty | 2 years |
| Size | 3 x 6 m |
| Frame Material | Steel |
| Cover Material | PVC |
| Fire Resistance | B1 fire retardant |
The tent was not tested for wind and snow; these loads are not covered by guarantee. Watch weather forecasts.
Tents are for temporary accommodation and should be taken down in adverse weather. Keep distance from utilities.
Check ground base suitability. Store tarp material at 10°C before use in low temperatures. Obtain permits.
Unpack and check parts against packing list. Remove excess lubricant from metal parts. Tighten screws manually.
Use water with slightly alkaline reaction for cleaning. Dry thoroughly before folding. Do not modify metal structure.
Do not dispose of tent components with ordinary garbage. Recycle them properly. Ask manufacturer if unsure.
Contact support@houseoftents.co.uk or TOOLPORT Service-Center for information or problems.
Detailed list of tent components with item numbers, descriptions, and quantities for different tent sizes.
Instructions for assembling the initial frame structure using specific components and angles.
Details on connecting frame parts using bolts and nuts for the tent structure.
Instructions for attaching long poles to the frame, including measurements.
Instructions for attaching and tensioning cables for structural support, with size diagrams.
Instructions for attaching a roller system component, likely for tarps.
Guidance on how to install the main tarpaulin sections onto the tent frame.
Completing frame connections with tension cables and specific poles.
Instructions for attaching base plates to the tent legs using bolts and nuts.
Attaching vertical poles to the frame, likely for the sides of the tent.
Using cables and fasteners to secure tarp sections to the frame.
Attaching components to the tent legs for ground anchoring and stability.
Connecting longer poles and securing the base structure with bolts.
Final tensioning of cables and reference to structural diagrams for different sizes.
Installing hooks, covers, and roller components onto the tent structure.
Detailed view of how to properly fasten tarp sections using integrated mechanisms.
Instructions for attaching guy ropes and stakes for final tent stability.
Provides phone numbers and email addresses for TOOLPORT support in various countries.
