11
OPERATION METHOD
21
22
23
24
Automatic Mode for Electric Power Tools
1. Connect the exible hose to the Flexible Hose
Outlet – Suction by inserting into the outlet and
aligning the arrow and locking pin on the end
of the exible hose, with the arrow and ridge on
the top of the Flexible Hose Outlet – Suction.
This should ensure the locking pin on the
exible hose aligns with the ridge in the Flexible
Hose Outlet – Suction. Rotate the exible hose
to the left to secure the hose into position.
2. Ensure the HEPA lter is secured on the
appliance head.
3. Connect the power cable of your AC / electric
power tool to the AC outlet socket. The
automatic AC outlet socket is ideal for power
tools up to 1200W. Check the rating label of
your power tool before connecting to the AC
socket outlet.
4. Connect the opposite end of exible hose
to the dust extractor connector on your AC /
electric power tool. Check that the connections
are secure and airtight. Press the ON/OFF
Switch to position “II” - Automatic Mode.
5. When you have nished your task, press “O”
on the ON/OFF switch.
WARNING: Check the HEPA lter regularly for any blockages which may
reduce the suction and cause motor overheating.
To Next Page
Loading...
