8
Squelch Control
Working mode Control
Working Band Control
When the radio is standby, turn SQ outter shaft clockwise to adjust squelch level.
RF Gain Control
When the radio is receiving, turn RFG outter shaft to adjust RF gain. Turn it clockwise
to increase gain, counter
-clockwise to reduce gain.
Mic Gain Control
When the radio is transmiting, turn MIC inner shaft to adjust Mic gain. Turn it clockwise
to increase gain, counter-clockwise to reduce gain.
Turn the mode switch to choose AM/FM/PA mode.
Turn the band switch to choose A/B/C/D/E/F band.
Echo times Control
When Echo function is on, turn E VOL inner shaft to adjust echo repeat times. Turn
it clockwise to increase times, anti-clockwise to reduce times.
Echo duration Control
When Echo function is on, turn E DLY outter shaft to adjust echo duration time.
Turn it clockwise to increase delay, counter-clockwise to reduce delay.
Channel Selection
Turn the channel knob to select desired channel.
Clockwise to increase, counter-clockwise to reduce
channel.
HOW TO USE YOUR RADIO
OFF/ON Radio
1.
Turn VOL clockwise to switch on the radio, the radio will emit a beep. When the
LED displays frequency or channel, the radio is on.
2.
Turn VOL anti-clockwise to switch off the radio, the radio is OFF when hear a
Click from the switch.
Volume Control
When the radio is turned on, turn VOL clockwise will increase the volume, turn VOL
anti-clockwise will reduce the volume.
Note: Adjust the volume during communication to get suitable level.