Bill Acceptor
www.topvme.com
16
6.Maintenance
Mild,non-abrasive,a small amount of soapy water.
Foreign objects on the LED or sensor may cause bill jamming and
decrease acceptance rate. To make sure the bill acceptor always works
smoothly, please clean the internal parts regularly.(Recommended every
4-6 months)
Please follow the steps below to clean the inside of the machine:
1. Turn o the Bill Acceptor power.
2. Open the back cover assembly (1, 2) as indicated below.
3. Clean the belt (3) and the rollers (4, 5) with a soft dry cloth or towel.
All manuals and user guides at all-guides.com
To Next Page
Loading...