To Next PageTo Next PageWhat to do if the Topcom Telephone icon flashes?
If the icon flashes on your Topcom Telephone, it could be due to several reasons: the handset might be out of range, so bring it closer to the base; the base might not have a power supply, so check the mains connection; or the handset might not be registered on the base, so register the handset on the base.
What to do if my Topcom BUTLER 900 Telephone does not ring?
If your Topcom Telephone base or handset does not ring, the ringing volume might be off or set too low. You should adjust the ringing volume.
Why is there no tone on my Topcom BUTLER 900?
If there is no tone on your Topcom Telephone, it could be due to a badly connected telephone cord. Check the telephone cord connection. Alternatively, the line might be occupied by another handset; wait until the other handset hangs up.
What to do if the Topcom BUTLER 900 does not react to pressing the keys?
If your Topcom Telephone does not react when you press the keys, it might be due to a manipulation error. Try removing the batteries and then putting them back in place.
Why is the volume of my conversation partner too low on my Topcom BUTLER 900?
If the volume of your conversation partner is too low on your Topcom Telephone, adjust the volume during the conversation by pressing the volume key.
How to fix no display on Topcom BUTLER 900 Telephone?
If there is no display on your Topcom Telephone, it could be due to several reasons: the batteries might be uncharged, so check their position and recharge them if necessary. Also, the handset might be turned off, so turn it on.
What to do if it is not possible to transfer a call on PABX with Topcom Telephone?
If it's not possible to transfer a call on PABX with your Topcom Telephone, the Flash Time might be too short. Set the unit to Long Flash Time.
General
