8
7 Audio ON/OFF
Tap the icon can turn on or off the sound.
8 Voice activation function (VOX)
With this function active you can use your smartphone or tablet for other APP in local view mode.
Tap the icon to run voice activation function, tap it again to turn the function off.
If you run on the function and then press the home button on your smartphone or tablet to exit the
app, the screen will show a reminder message when the volume level from camera unit is higher
than the volume setting level. Tapping or sliding the reminder message icon can launch the app
directly.
Note:
– If you turn on the voice activation function and press the home button on your
smartphone or tablet to exit the app, the VOX function can still work and remind
you of audio events from the camera.
– The voice activation function can only work in local view mode!
– If you want to exit the app completely, please doubleclick the home button on
your iPhone/iPad when it is in home screen status, and then tap the Easy iCAM
icon until the cancel symbol appears. When you exit the app completely, the voice
activation function can't work.
– If you want to exit the app completely, please press the back button on your
Android system. When you exit the app completely, the voice activation function
can't work.
11.1.2 Setting
Tap the icon to set up camera functions.
1 Internet Setting
You can setup an Internet connection, or change
the camera connection to another Wi-Fi router.
2 Wi-Fi Setting
If you want to change the camera name (Wi-Fi
SSID) or password, please tap this row to carry
out the change.
3 VOX Level (volume trigger level)
Tap and slide the VOX Level bar to adjust the
volume trigger level.
iOs
Android
To Next Page
Loading...
