Topcom ultra range series - The Alarm Function; Setting an Alarm; Setting the Alarm Tone; Phone Book

23
8OWUD5DQJH
(1*/,6+
 7KHDODUPIXQFWLRQ
You can set various alarms for handsets registered on the base
station. The alarm only sounds on the handset and not on the base
station or any other handset.
If an alarm is set, the alarm symbol appears in the display in
standby mode.
When the alarm time is reached the handset will ring for 1 minute.
To stop the alarm tone, press any key on the handset.
5.4.1
Setting an alarm
1. Press .
2. Press or repeatedly, select ‘&/2&.$/$50’.
3. Press to confirm.
4. Press or repeatedly, select ‘$/$50’.
5. Press to confirm.
6. Press or multiple times and select one of the 3
possible settings: ‘21&(’, ‘'$,/<’, or ‘2))’. Confirm by
pressing . If you select ‘21&(’ or ‘'$,/<’, the
following appears in the display:
6(77,0(
07:00
7. Enter the alarm time as four digits and press to
confirm your input.
8. To deactivate the alarm function, select ‘2))’ and confirm with
.
5.4.2
Setting the alarm tone
1. Press .
2. Press or repeatedly, select ‘&/2&.$/$50’.
3. Press to confirm.
4. Press or repeatedly, select ‘$/$50721(’.
5. Press to confirm.
6. Press or multiple times and select one of the 7
alarm tones.
7. Press to confirm.
 3KRQHERRN
You can store 200 numbers (up to 24 digits long) with an
associated name (up to 12 characters long) in the phone book.
 6DYHDQHZHQWU\LQWKHSKRQHERRNE\WKH
SKRQHERRNPHQX
1. Press .
2. To add a new entry, press the menu key and select
‘1(:(175<’ with .
•‘(17(51$0(’ appears in the display. Enter the name using
the alphanumeric keys.
3. Press and enter the telephone number.
4. Press to store the entry in the phonebook or press
(6&
to cancel without saving the entry.
 6DYHDQHZHQWU\LQWKHSKRQHERRNE\RQKRRN
GLDOPRGH
When you enter a telephone number is standby, and you press
afterwards the menu key you can store the number
direct into the phonebook:
1. In standby enter the telephone number you want to store.
2. Press .
•‘(17(51$0(’ appears in the display. Enter the name using
the alphanumeric keys.
3. Press and edit if necessary the telephone number.
Set the date and time before using this function so that
the alarm sounds at the correct time.
17
4 15
17
4 15
17
4 15
17
17
17
17
4 15
17
4 15
17
4 15
17
16
17
17
17
17
3
17
17
17