Need help?Do you have a question about the Topcon Athene SM-1 and is the answer not in the manual?
General| Model | Athene SM-1 |
|---|---|
| Manufacturer | Topcon |
| RAM | 256 MB |
| Operating Temperature | -20°C to +50°C |
| Waterproof/Dustproof | IP65 |
| Humidity | 95% non-condensing |
| Bluetooth | Yes |
| Wi-Fi | Yes |
| Serial Port | Yes |
| SD Card Slot | Yes |
| Power Supply | AC adapter (100-240V, 50/60Hz) |
Navigate between the console's main Setup and Operation interfaces.
Configure the console to communicate with ISOBUS compliant ECUs for system interaction.
Create a new vehicle profile by selecting manufacturer, model, and parameters for operation.
Choose the active implement profile, manage connections, and set primary implements.
Define implement dimensions for accurate guidance and auto-section control.
Overview of the Main, Totals, and Spreader Settings screens and their functions.
Set up and calibrate load cells, including CAN module, Scale Link, and angle sensor.
Configure the spreader's full working width and associated offset parameters for accurate application.
Configure speed sensor options, including SSF Autocal and simulated speed for accurate operation.
Understand and select between Dynamic, Static, and Volumetric calibration modes for product application.
Perform dynamic calibration for products with variable density at higher application rates.
Save and load configuration settings and parameters to/from a USB stick for backup or transfer.
Access and configure auto section control features for precise application coverage.
Set up and manage variable rate control using prescription maps or shapefiles for targeted application.
Essential safety information and general precautions for operating the equipment safely.
Operator responsibilities, precautions, and critical safety instructions for safe use.
Legal disclaimers regarding product use, liability, warranty, and service.
To Next Page
