How to fix Topcon Controller error 'Fail to get ××× character set information'?
If your Topcon Controller displays 'Fail to get ××× character set information', try turning on the switch of KB-50 again. If the trouble is not solved, it is necessary to update the Operating System of KB-50.
Why Topcon Controller instrument does not work when the dial or switch is pressed?
If the dial or switch on your Topcon Controller isn't working, the connector might not be properly connected. Ensure the connector is securely inserted.
How to fix Topcon KB-50 error 'CC2.dll was not found'?
If your Topcon Controller displays 'CC2.dll was not found', it indicates that the application program wasn't set up correctly. Try re-installing the application program.
What to do if Topcon KB-50 says 'Register at least 1 chart'?
At least, register one chart.
What to do if Topcon KB-50 says 'Can't show the examination list'?
Update the KB-50 to the newest version.
How to troubleshoot Topcon KB-50 Controller PictBridge Printout ERROR?
If you encounter a 'PictBridge Printout ERROR' on your Topcon Controller, check whether the printer applicable to Pict- Bridge is connected to the USB port of the CV power supply unit correctly, make sure that the switch of the printer applicable to PictBridge is ON, and make sure that the print paper is set in the printer applicable to PictBridge correctly.
What to do if Topcon Controller says 'Can't reset CV'?
If you see the message 'Can't reset CV' on your Topcon Controller, ensure the cable connecting the CV power supply unit to the measuring head, CV-5000, is correctly connected. Then, touch the [Yes] button in the message box to close the setting display.
How to fix Topcon KB-50 Controller Initialize ERROR?
If you encounter the message 'Initialize ERROR!!' on your Topcon Controller, and are prompted to change the settings, first, touch the [Yes] button in the message box. Then, check the contents of the setting changed last, or touch the [Default] button on the setting display to return the data to the initial set values, as the contents of setting are not correct.
What to do if Topcon Controller says 'Can't show the course list'?
When the course optometry method is used, register the course.
Why Topcon Controller software doesn't run correctly because the ROM version of the power supply is not compatible?
If your Topcon Controller software isn't running correctly because the ROM version of the power supply is not compatible, update the version of the CV power supply unit to the specified one.
Instructions on how to use the instrument correctly.
Guidelines for maintenance tasks to be performed by the user.
Disclaimer of responsibility for damages under certain conditions.
Checklist for common troubles, conditions, and remedial measures.
Settings related to data connection with external devices and initial data.
Configuration for chart device, chart page registration, and charts used in tests.
Functionality to customize charts displayed on the chart page.
Procedure to change the chart used for the cross cylinder test.
Setting the operational mode, display options, and test conditions.
Setting the step quantity for changing refractive power using the controller's dial.
Setting the language, duration time for display, and date/time.
Managing the list of courses and constructing new ones.
Setting the display of sub-information like reference data, dial navigation, and help.
Setting other items like lens/occluder, printer, and KB operation.
Technical specifications for the KB-50 and CV-5000, including ranges and steps.
Explanation of symbols used in the manual and their IEC publication references.
Guidelines for daily checkups and cleaning procedures.
Procedure for disposing of the instrument according to local regulations.
Procedure for setting the date and time on the instrument.
Diagram illustrating the general flow of operations from data input to power off.
Detailed steps for inputting data from auto refractometer and lens meter.
Explanation of the Smart CC function for automatic astigmatism testing.
Explanation of symbols used in the manual and their IEC publication references.
General| Brand | Topcon |
|---|---|
| Model | KB-50 |
| Category | Controller |
| Language | English |
To Next Page
