51
OTHER FUNCTIONS
7 Touch the chart registered in the chart page and press the function button [Modify].
By touching the chart registered on the chart page, you can customize the test to be executed
and the test start status.
You can also relate other test to the same chart.
8 Set the test, auxiliary lens, mask, etc. and touch the [OK] button.
Now, relating the test information to the selected chart is finished.
9 Select a chart to be set when resetting.
10 Touch the function button [Initial Chart].
Now, it is possible to set the specified chart automatically when starting or after resetting.
11 After customizing, touch the [OK] button.
12 By the above operation, you can register the Semi-Auto course.
To Next Page
Loading...
