Topcon KB-50 User Manual

49
OTHER FUNCTIONS
ORIGINAL COURSES
In KB-50, there are two course functions. In the Semi-Auto course, you can execute the tests by
touching the chart on the chart page. In the program course, you can execute the tests in the
already determined sequence.
Semi-Auto course
The inspector can arrange the tests, which are executed frequently, on the chart page optionally to
execute the tests.
It is necessary to touch the chart for each test.
Program course
The inspector can execute the tests in order by programming the flow of tests.
The inspector can concentrate upon each test without minding the test order.
REGISTRATION OF ORIGINAL COURSE
Registering and editing each course
Registration of Semi-Auto course
1 Press the [Shift] switch and [Menu] switch on the keyboard.
2 Touch the [Chart] button on the [Settings] screen.
3 Touch the [Chart page registration] button.
4 Touch the chart of the list and drag it to the chart page.

Topcon KB-50 Specifications

General

Brand	Topcon
Model	KB-50
Category	Controller
Language	English