80
REFERENCE MATERIAL
SYMBOL
MAINTENANCE
DAILY CHECKUPS
Do not store the instrument where there is much dust.
When not in use, turn off the power.
CLEANING
When the external cover, operation panel, monitor, etc. are stained, wipe it with a dry cloth periodi-
cally.
If the external cover is badly stained, prepare a tepid solution of the neutral detergent for kitchen-
ware. Moisten the cloth with the aforementioned solution and wring it thoroughly. Then, wipe the
external cover with it.
DISPOSAL OF PRODUCT
Dispose of the instrument according to the local disposal or recycling laws.
Symbol IEC Publication Description Description (French)
60417-5031 Direct current Courant continu
60348
Attention, consult accompanying
documents
Attention, consulter les documents
d'accompagnement
CAUTION
To avoid injury caused by pinching when moving the monitor unit, do not
place your hand between the monitor unit and the main unit.
CAUTION
To avoid electric shock, do not remove the interface cover. Ask the ser-
viceman to repair the instrument.
NOTE
Do not wipe the resin parts with volatile solvent. To prevent the resin
parts from discoloring or deteriorating, do not use benzine, thinner, ether
or gasoline.
To Next Page
Loading...
