Topcon KB-50 User Manual

2
CAUTIONS FOR USE
Basic caution
Do not install the instrument on an uneven or unsteady surface, including a slope.
[To prevent the instrument from tipping over or falling and to avoid injury]
Do not handle the plugs with wet fingers.
[To avoid electric shock]
Do not place your hand between the monitor unit and the main unit when adjusting the angle of the LC
display.
[To avoid injury caused by pinching]
Do not remove the interface cover. Ask the serviceman to repair the instrument.
[To avoid electric shock]
Disposal
Dispose of the instrument according to local disposal and recycling laws.
ENVIRONMENTAL CONDITIONS FOR USE
Temperature : 10°C ~ 40°C
Humidity : 30% ~ 75% (without dew condensation)
Air pressure : 700hPa ~ 1060hPa
STORAGE, USAGE PERIOD AND OTHERS
1. Environmental conditions for installation (without package)
Temperature : 10°C ~ 40°C
Humidity : 30% ~ 75% (without dew condensation)
Air pressure : 700hPa ~ 1060hPa
2. When storing the instrument, ensure that the following conditions are met:
(1) The instrument should not be splashed with water.
(2) Store the instrument where air pressure, temperature, humidity, ventilation, sunlight, dust, salty/
sulfurous air, etc. do not give any negative side effect.
(3) Do not store or transport the instrument on a slope or uneven surface or in an area where it is
subject to vibrations or instability.
(4) Do not store the instrument where chemicals are stored or gas is generated.
3. Usage period
8 years from delivery providing regular maintenance is performed (according to the self-certification
[Topcon data])
ENVIRONMENTAL CONDITIONS FOR PACKAGING IN TRANSPORTATION
Temperature : -20°C ~ 50°C
Humidity : 10% ~ 95%
CHECKPOINTS FOR MAINTENANCE
Maintenance by user
1. Regularly maintain and check the instrument and its parts.
2. When using the instrument after a prolonged period of inactivity, confirm normal and safe operation
beforehand.
3. When the monitor is stained, wipe it with a dry cloth, etc.
4. Refer to "MAINTENANCE" on P.75 for details.

Topcon KB-50 Specifications

General

Brand	Topcon
Model	KB-50
Category	Controller
Language	English