Topcon DT-200 series User Manual

30
Selecting mode 2
To set the instrument the selecting mode 2, turn the power ON while press-
ing the [V/%] key.
• Do not change the setting value (0) of unused items.
• *1)DT-205/205L only
Selecting mode 2
Digit
No.
Items Contents Setting
value = 0
Setting
value = 1
1
[0 SET] key
pressing
once / twice
Choose once or twice for press-
ing the [0 SET] key.
Twi ce Once
2
Compass
ON/OFF
Set the function of compass
(Vertical angle scale).
OFF ON
3
RS-232
Output *1)
Set the function of sending the
measured data.
OFF ON
4
H Angle
Memory
Horizontal angle set can be re-
tained after the power is turned
off.
OFF ON
5
Tilt
correction
ON/OFF *1)
Set the function of the tilt cor-
rection.
OFF ON
6
7
Unused
---
--- ---
0 0 0 0 0 0 0
Digit No.1Digit No.7
Selecting mode 2
[V/%] key + Power on

Topcon DT-200 series Specifications

General

Brand	Topcon
Model	DT-200 series
Category	Laser Level
Language	English