Need help?Do you have a question about the Topcon RL-SV1S and is the answer not in the manual?
General| Type | Rotary Laser Level |
|---|---|
| Self-Leveling | Yes |
| Leveling Range | ±5° |
| IP Rating | IP66 |
| Laser Class | Class 2 |
| Laser Wavelength | 635 nm |
| Accuracy | ±1.5 mm at 30 m (±1/16 in at 100 ft) |
| Range | 800 m (2, 600 ft) diameter with receiver |
| Power Source | Rechargeable battery |
| Rotation Speed | 600 RPM |
| Operating Temperature | -4°F to 122°F |
Explains symbols and notes used for guidance in the manual.
Covers warnings related to operating environment and product disassembly.
Details safety rules for batteries, chargers, and power connections.
Provides essential safety instructions for using the tripod with the instrument.
Covers battery charging, warranty policy, and impact protection advice.
Addresses condensation due to temperature changes and export regulations.
Outlines user safety and manufacturer responsibility limitations.
Details the laser product classification and associated general warnings.
Provides specific warnings and cautions for safe laser beam usage.
Identifies the main parts and controls of the RL-SV1S and RC-50.
Explains the functions of buttons and indicators on the devices.
Identifies the parts, controls, and display elements of the LS-80L sensor.
Details the precision levels and accuracy of the LS-80L beam detection.
Instructions for installing and removing batteries for the RL-SV1S.
Step-by-step guide for charging the instrument's battery.
Guidance on setting the communication channel between devices.
Covers setting up the instrument and initiating horizontal auto-leveling.
Demonstrates typical usage scenarios and procedures.
Explains the height alert feature and its reset procedure.
Procedures for entering and setting grade values on the X-axis.
Aligning the laser calibration to a specific worked grade.
Manually adjusting the vertical direction of the laser beam.
Guides users through selecting and setting various functions via the menu.
Covers laser beam masking and changing the rotary head speed.
Switching between auto/manual leveling and setting communication channels.
Managing the standby (Sleep) mode and height alert feature.
Checks and adjustments for horizontal grade and cone errors.
Procedure to verify the accuracy of grade setting.
Steps for checking and adjusting the vertical beam alignment.
To Next Page
