Need help?Do you have a question about the Topcon RL-H3CL and is the answer not in the manual?
General| Type | Rotary Laser Level |
|---|---|
| Self-Leveling | Yes |
| Water Resistance | IP66 |
| Laser Class | Class 3R |
| Laser Diode | 635 nm |
| Leveling Range | 5 degrees |
| Battery Life | 100 hours |
| Rotation Speed | 600 rpm |
| Operating Temperature | -10°C to +50°C |
Lists all items included in the package for RL-H3C/RL-H3CL and RL-H3CS models.
Advises on pre-operation checks and care for the instrument.
Provides guidelines for cleaning and storing the instrument after use.
Explains the meaning of warning and caution symbols used in the manual and on the product.
Outlines the manufacturer's limitations of liability for product use and misuse.
Describes the laser classification and safety standards for the product.
Identifies and explains the components and controls of the RL-H3C and RL-H3CL models.
Details the parts and functions of the LS-70B/70C laser sensor, including auto shut-off.
Step-by-step guide for replacing batteries in the main rotating laser unit.
Instructions for replacing the battery in the LS-70B laser sensor.
Step-by-step instructions for operating the rotating laser and laser sensor.
Guides on aligning the laser for setting a desired slope direction.
Details the procedure for setting and adjusting the slope using the slope key.
Describes how to check the horizontal calibration of the laser beam.
Step-by-step guide to calibrate the laser beam along the X-axis.
Step-by-step guide to calibrate the laser beam along the Y-axis.
Technical specifications for the RL-H3C model and its laser sensor.
To Next Page
