Need help?Do you have a question about the Topcon RL-200 1S and is the answer not in the manual?
General| Type | Rotary Laser Level |
|---|---|
| Self-Leveling | Yes |
| IP Rating | IP66 |
| Laser Class | Class 2 |
| Waterproof/Dustproof | Yes |
| Laser Wavelength | 635 nm |
| Accuracy | ±1.5 mm at 30 m (±1/16 in at 100 ft) |
| Leveling Method | Self-Leveling |
| Self-Leveling Range | ±5 degrees |
| Operating Time | Up to 100 hours |
| Rotation Speed | 300 rpm |
| Operating Temperature | -4°F to 122°F |
| Laser Diode | Semiconductor |
Protects the instrument from damage during transport, as heavy shocks can affect accuracy.
Explains how temperature changes can cause condensation and the need for acclimatization.
Defines warning and caution symbols used in the manual for safety.
Highlights critical safety warnings regarding instrument handling and environment.
Offers cautionary advice regarding battery leakage and handling wet power supply plugs.
Details the product's compliance with laser safety standards and instructions for safe use.
Warns against improper use of controls that may lead to hazardous radiation exposure.
Advises on safe handling of the laser beam, avoiding direct exposure and stray beams.
Specifies training, manual reading, protective gear, and power-off procedures for safe operation.
Shows examples of normal and menu screen displays.
Explains the function of each key on the instrument's control panel.
Describes the meaning of the LED indicator on the instrument's control panel.
Explains the functions of the instrument's control panel keys.
Describes the LED indicator for auto-leveling and rotary head status.
Identifies the parts of the instrument.
Labels the components of the RC-400 remote controller.
Labels the components of the instrument's control panel.
Explains the components of the normal display screen.
Shows status indicators for remote controller transmission and reception.
Displays an example of the menu screen layout.
Details the functions of the instrument's control panel keys.
Explains the LED indicator for auto-leveling and rotary head status.
Explains how to use the level sensor for checking beam elevation.
Details how to connect and manage power sources for the instrument.
Provides instructions on how to properly set up the instrument for auto-leveling.
Describes the sequence of key presses for operating the remote controller.
Illustrates the indicators for successful or unsuccessful data transmission.
Explains controlling multiple RL-200 2S units and setting channels with the RC-400.
Explains the instrument's standby mode behavior and automatic power-off.
Illustrates the target used for aligning the laser beam.
Illustrates grade entry for single and dual axes.
Explains grade entry using the remote controller, including confirmation.
Guides users on how to access and change settings within the menu system.
Details the process of adjusting the laser beam shutter for specific directions.
Illustrates masking Mode 1 and Mode 2 configurations.
Guides on setting the rotary head speed to different RPM values.
Details the process of installing and charging the rechargeable battery pack.
Explains the charging status indicators and conditions for the rechargeable battery.
Offers tips for longer battery life and proper storage.
Step-by-step guide for replacing the dry cell batteries.
Explains the process of checking and calibrating the horizontal alignment of the instrument.
Outlines the initial steps for checking the instrument's horizontal calibration.
Describes calibration steps involving laser beam and sensor positions.
Details the procedure for adjusting the laser beam alignment after checking calibration.
Indicates calibration calculation, completion, and error handling.
Outlines the initial steps for checking grade setting accuracy.
Presents the formula and procedure for calculating grade setting error.
Details the power switch, precision settings, and auto-cut off function of the level sensor.
Explains how to adjust the buzzer volume and the auto-cut off feature.
Explains the height alert and battery warning indicators on the LS-80L display.
Shows battery status indicators.
Lists technical specifications for the RC-400 remote controller.
Lists technical specifications for the LS-80L level sensor.
Explains battery low errors and their solutions.
Explains safety lock and auto-leveling range errors and their solutions.
Explains calibration errors and their solutions.
Details specific error codes like E-05, E-51, E-60's, E-80's, E-99, and backlight flashing.
Details the FCC compliance statements and limits for Class A digital devices.
Provides manufacturer details and declaration of conformity for the product.
Outlines regulatory compliance for Canada, including ICES and Industry Canada specifications.
Provides information on returning and recycling rechargeable batteries in the US.
Details EU R&TTE Directive compliance and contact information for Declaration of Conformity.
Explains the WEEE Directive for product disposal and EU Battery Directive for battery treatment.
To Next Page
