Need help?Do you have a question about the Topcon DT-200 series and is the answer not in the manual?
General| Water Resistance | IP66 |
|---|---|
| IP Rating | IP66 |
| Minimum Display | 1" or 5" (depending on the model) |
| Display | LCD |
| Battery Type | 4 x AA batteries |
Precautions for laser beam usage and avoiding eye injury from the telescope.
Details on the laser classification and adherence to safety standards.
Step-by-step guide for setting up the instrument on a tripod and leveling.
Procedure for measuring horizontal and vertical angles to a target.
Methods for repetition angle measurement and stadia surveying.
Warnings and instructions for safe and correct operation of the laser.
Instructions for removing, replacing, and installing the instrument's battery.
Key points and sequence for performing instrument adjustments accurately.
Procedure for checking and adjusting the plate level's perpendicularity.
Method for adjusting the circular level using capstan screws.
Steps to check and adjust the vertical cross-hair's perpendicularity.
Procedure to ensure the telescope's line of sight is perpendicular to the horizontal axis.
How to check and adjust the optical plummet for precise vertical alignment.
Setting the vertical angle zero point, critical for determining coordinate origin.
To Next Page
