Need help?Do you have a question about the Topcon DL-501 and is the answer not in the manual?
General| Operating Temperature | -10°C to +50°C |
|---|---|
| Range | Up to 100m with detector |
| Working Range | Up to 100m with detector |
| Leveling Time | 3 seconds |
| Laser Diode | 635nm, Class 2 laser |
| Battery Type | 4 x AA batteries |
Details on powering the instrument on/off and basic button functions.
Procedure for charging the instrument's battery using the provided charger.
Instructions for safely installing and removing the battery from the instrument.
Steps for properly mounting and securing the instrument onto a tripod.
Methods for leveling the instrument using circular bubble or screen display.
Calculating height difference between two points without setting a route.
Calculating elevation of a point based on a known point's elevation.
Setting up a route by selecting an existing route or creating a new one.
Measuring height difference along a set route using backsight/foresight sequences.
Finding a point at a specified elevation, relative height, or distance.
Calculates and displays discrepancies between go and return runs for leveling.
Calculates closure errors for leveling links and loops.
Methods for distributing closure error among points on a route.
Steps to output JOB data to a host computer or external memory device.
Procedures for outputting route data to host computer, SD card, or USB memory.
Checking and adjusting the circular level for proper instrument leveling.
Procedure to cancel tilt zero point errors and calibrate the tilt sensor.
Correcting the reticle cross-lines for accurate measurements.
To Next Page
