Topcon DL-501 User Manual

87
17. MANAGING KNOWN POINT DATA
5. Align the cursor with the relevant route and
press {}.
A list of known point data in
that route is displayed.
6. Align the cursor with the known point data to
be displayed in and press {}.
The point id and elevation of the selected
known point data is displayed.
7. Press {ESC} to return to <Known point data
menu>.
It is possible to delete known point data registered in the current JOB.
PROCEDURE Deleting specific known point data
1. Select “Management” in <Menu>.
2. Select “Known point data” in <Management
menu>.
3. Select “Deletion”.
4. Align the cursor with the point you wish to
delete and press {}. "DEL" is displayed to
the right of the point id.
17.4 Deleting Known Point Data
*R1 20
R2 20
LINE01 15
LINE02 10
LINE03 15
LAST
TOP
...P
PM-BM-001
PM-BM-002
PM-FIX-003
PM-FIX-004
PM-FIX-005
LAST
TOP
...P
SRCH
Known point data menu
1.Key in coord
2.Comms output
3.View
4.Deletion
5.Initialize
PM-BM-001
PM-BM-002
PM-FIX-003
PM-FIX-004 DEL
PM-FIX-005 DEL
LAST
TOP
...P
OK
P1
DL-501_E.book 87 ページ ２０１５年９月１７日 木曜日 午後１時２１分

Topcon DL-501 Specifications

General

Brand	Topcon
Model	DL-501
Category	Laser Level
Language	English