Topcon DL-501 - 15.3 Backing Up a JOB

15. SELECTING/DELETING A JOB
74
It is possible to back up JOB data to a host computer or external memory device.
PROCEDURE
1. Select “Management” in <Menu>.
2. Select “JOB" in <Management menu>.
<JOB menu> is displayed.
3. Select “JOB backup”.
4. Align the cursor with "Source JOB id" and
press [LIST]. Align the cursor with the JOB
you wish to back up and press {}.
5. Select "SD" or "USB" in "Destination".
6. Enter JOB id for backup file in "Backup JOB
id".
7. Press [OK] to start backup.
8. Press {} when "Output complete" is
displayed. The screen in step 4 is restored.
15.3 Backing Up a JOB
Job menu
1.JOB selection
2.JOB deletion
3.Comms output
4.JOB backup
5.JOB restore
Source JOB id
:Job-base01
Destination :SD
Backup JOB id
:Job-ahead01
LIST OK
Job backup
Job-base01
-> Job-ahead01
Outputting 2/ 8
DL-501_E.book 74 ページ ２０１５年９月１７日 木曜日 午後１時２１分