19. CHANGING THE SETTINGS
96
SD mirroring
This function synchronizes the content of the SD card with the internal memory. Data
stored to the internal memory will automatically be stored to the SD card. Data deleted
from the internal memory will also be deleted from the SD card.
Items set and options (*: Factory setting)
Power off :No, 30min.*
Contrast: 0 to 15 (10*)
Power-saving automatic cut-off
To save power, power to the DL is automatically cut off if it is not operated for 30 minutes.
Items set and options (*: Factory setting)
Mode: RS232C*, Bluetooth
Baud rate: 1200*, 2400, 4800, 9600, 19200, 38400, 57600bps
Parity: Not set*, Odd, Even
Xon/Xoff: Yes, No*
STX/ETX (CSV): Yes, No*
AVG out mode: 1*/2
Control commands and communication formats: "Communication Manual"
Setting "Mode" to "Bluetooth": "9.3 Communication between the DL and Companion Device"
19.2 Instrument Configuration
19.3 Communication Setup
Power off :30min
Contrast :10
Mode :RS232C
Baud rate :1200bps
Parity :Not set
Xon/Xoff :No
STX/ETX(CSV):No
DL-501_E.book 96 ページ ２０１５年９月１７日 木曜日 午後１時２１分
To Next Page
Loading...
