Topcon DL-501 - Connecting Via Communication Cable

33
9. CONNECTING TO EXTERNAL DEVICES
3. Select "Comms output" in <JOB menu> and
set "Com.locat."
"18.1 Outputting JOB Data PROCEDURE
Outputting JOB data to host computer"
DL starts outputting data.
• If a connection has not yet been established,
the screen at right is displayed. After a
connection has been established, the data is
output.
PROCEDURE Basic cable settings
1. Connect the DL to the external device using
the cable.
Cables: "24. OPTIONAL
ACCESSORIES"
2. Select "Comms setup" in <Config menu>.
Set communication conditions.
"19.3 Communication Setup"
9.5 Connecting via Communication Cable
Job id
JOB1
Format CSV_1
Outputting 98/ 99
Bluetooth
Waiting for
connection...
DL-501_E.book 33 ページ ２０１５年９月１７日 木曜日 午後１時２１分