Need help?Do you have a question about the Topcon RL-SV2S and is the answer not in the manual?
General| Brand | Topcon |
|---|---|
| Model | RL-SV2S |
| Category | Laser Level |
| Language | English |
Explains warning and caution symbols used in the manual for safety.
Covers safe usage, avoiding specific environments, and case handling for the instrument.
Details on safe handling of power cords, voltage, batteries, and chargers.
Guidelines for safely mounting and using the instrument on a tripod.
Protect instrument against damage from vibration, impact, and abrupt temperature changes.
Manufacturer's disclaimers regarding product usage, misuse, and outcomes.
Information on laser classification and safe operation to prevent eye damage.
Identifies the parts of the RL-SV2S rotating laser instrument.
Explains the indicators and symbols shown on the RL-SV2S screen.
Identifies the parts of the RC-60 remote controller.
Explains the display indicators for the RC-60 remote controller.
Identifies the parts of the LS-80L level sensor.
Explains the indicators and battery status for the LS-80L level sensor.
Illustrates and explains the LS-80L detective range based on display indicators.
Instructions for installing and removing dry cell and rechargeable batteries for the RL-SV2S.
Steps for installing dry cell batteries in the RC-60 and LS-80L.
How to set the communication channel for the RC-60 and RL-SV2S to prevent interference.
Guides on setting up the RL-SV2S for horizontal rotation and auto-leveling.
Demonstrates example operations like vertical rotation and using the LS-80L.
Explains the height alert feature and how to reset it after a shock.
How to enter and set grade values for the laser beam on X and Y axes.
A practical example demonstrating how to set grades for accurate work direction.
Using the instrument to align grades to a worked grade via manual slope.
How to manually align the vertical laser beam using directional keys.
Overview of setting functions like Safety Lock, Sleep Mode, and Speed.
How to shut off laser emission in unnecessary directions for better usability.
How to change the rotation speed of the laser head between 600 and 300 RPM.
How to cancel auto leveling and switch to manual mode for the instrument.
Procedures for changing the communication channel to prevent interference between devices.
How to enable or disable the sleep mode for power saving and standby.
How to enable or disable the height alert function for operational safety.
Procedures for checking and adjusting horizontal rotation accuracy.
How to check for and address grade errors in horizontal rotation.
How to check for and address cone errors in horizontal rotation.
How to check for errors in grade setting accuracy.
Steps for checking the vertical calibration of the instrument.
Detailed steps for adjusting vertical calibration if errors are detected.
USA regulatory compliance information related to FCC rules for digital devices.
Official declarations and contact information for Topcon's USA representation.
Warning about potential exposure to lead, a chemical known to the State of California to cause harm.
Guidelines for recycling rechargeable batteries in California and NY, USA.
Regulatory compliance information for Canada under ICES-003 for digital apparatus.
Information regarding the compliance label for Australia.
Compliance with the EU Radio and Telecommunications Terminal Equipment Directive.
Compliance with EU directives for waste electrical/electronic equipment and batteries.
To Next Page
