7. Applied Operation and Setting of Various Functions
44
Setting channel
When more than one RL-SV2Ss is used at the same location, change the communication
channel to prevent interference.
$
You may set the channel from 1 to 9.
1 Press the key to display the menu screen.
2
Press the or key to select the communication channel (CH.SET) setting, and press the key.
3 Press the or key to select the channel and press the key. Setting is complete.
Sleep mode ON/OFF
When the Sleep Mode is turned ON with the RC-60, the RL-SV2S will change to the Standby
Mode (Laser OFF, head rotation OFF and auto leveling OFF).
To Next Page
Loading...
