Topcon RL-SV2S User Manual

7. Applied Operation and Setting of Various Functions
37
The laser beam can be moved to the direction of the key during vertical rotation.
$
• Only the X axis can be moved.
• Allowable alignment range: ±5½ (when the instrument is set up on the 0½ surface)
1 Set the instrument.
2 Press the Power control key to turn unit on. When
auto leveling is complete, the laser beam will be
vertically emitted.
3 Move the RL-SV2S to align Point A and the laser
beam, and make sure that the bubble is at the
center of the vertical rotation circular level vial on
the control panel.
7.2 Line Control (manual vertical beam alignment)

Topcon RL-SV2S Specifications

General

Brand	Topcon
Model	RL-SV2S
Category	Laser Level
Language	English