Topcon RL-SV2S User Manual

25
6. BASIC OPERATION
 Horizontal Rotation
1
Set the instrument to the tripod or smooth surface.
2 Press power switch (ON). After auto leveling, the laser
beam will emit horizontally.
The RL-SV2S automatically levels within the range of ±5° as
shown below.
It is also possible to set grades for the RL-SV2S in the
direction of 2 axes. C7.1 Setting Grades(p. 29) on how to
set grades.
6.1 Setting Up Instrument
±5°

Topcon RL-SV2S Specifications

General

Brand	Topcon
Model	RL-SV2S
Category	Laser Level
Language	English