EasyManua.ls Logo

Topcon RL-VH4G User Manual

Topcon RL-VH4G
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION MANUAL
ROTATING LASER
RL-VH4G
31339 90040 TPS
Question and Answer IconNeed help?

Do you have a question about the Topcon RL-VH4G and is the answer not in the manual?

Topcon RL-VH4G Specifications

General IconGeneral
TypeRotary Laser Level
Self-LevelingYes
Leveling Range±5 degrees
IP RatingIP66
Laser Wavelength635 nm
Laser ClassClass 2
RangeUp to 800m with detector
Rotation Speed600 rpm
Power SourceRechargeable battery
Operating Temperature-4°F to 122°F
Accuracy±1/16 inch at 100 feet
Battery Life100 hours (alkaline) / 60 hours (rechargeable)

Summary

Instruction Manual Rotating Laser RL-VH4G

Foreword

Handling Precautions

Provides guidance on safe handling and operation of the laser instrument.

Safety Information

Safety Cautions

Cautionary Notes

User Responsibility and Exceptions

Laser Safety Standards and Classification

Laser Warning Labels

Details the warning labels applied to the laser instrument for safety.

Standard System Components

Nomenclature and Functions

Control Panel Overview

Preparation for Use

Instrument Setup for Horizontal Operation

Instructions for setting up the instrument for horizontal rotation and leveling.

Instrument Setup for Vertical Operation

Battery Warning Lamp Indicators

Explains the meaning of the battery warning lamp states.

Auto-leveling Lamp Indicators

Explains the meaning of the auto-leveling lamp states.

Disabling Auto-leveling Mode

Procedure for switching the instrument from auto-leveling to manual mode.

Operation Modes

Scanning Mode Operation

Details how to use the instrument in scanning mode with a target.

Continuous Scan Operation

Laser Sensor Mode

Laser Pointing Mode

Describes the mode where rotation stops and beam is manually pointed.

Adjusting Rotation Speed

How to change the rotation speed when in laser pointing mode.

Head Protector Removal and Installation

Height Alert Function

Setting Slopes

Procedure for Setting Slopes

Cancelling Slope Settings

How to revert from slope mode back to auto-leveling mode.

Line Control: Manual Vertical Beam Alignment

RC-30 Remote Control Overview

RC-30 Remote Control Functions Description

Setting Remote Control Communication Channel

Maintaining Power Sources: Replacing Batteries

Checking and Adjusting Performance

Horizontal Calibration Procedure

Checking Horizontal Calibration

Steps to check the accuracy of the horizontal calibration.

Adjusting Horizontal Calibration

Y Axis Calibration

Checking for Horizontal Rotation Cone Error

Vertical Calibration Procedure

Checking Vertical Calibration

Steps to check the accuracy of the vertical calibration.

Adjusting Vertical Calibration

Standard and Optional Accessories

LS-70G Laser Sensor Overview

Details the features and operation of the LS-70G laser sensor.

Battery Holder DB-49C and BT-63Q Charging

Storage Precautions

How to Store Equipment (1)

How to Store Equipment (2)

RL-VH4G Specifications

RC-30 Remote Controller Specifications

Error Codes and Corrective Actions

Related product manuals