7. Applied Operation and Setting of Various Functions
36
7 Press the keys described on the right
to move the direction of laser beam to
match the grade.
$
• When the , , , or key is
pressed, the laser beam will emit even
if automatic alignment starts.
• This mode can be used with the RC-60.
• When the RC-60 is used in an
environment in which similar radio
signals (wireless LAN, etc.) are
transmitted, and when the , ,
, or key is long-pushed in step
7, the laser beam grading may stop. If
this interferes with the operation,
change the communication channel for
the RL-SV2S and RC-60 and try again.
C5.2 How to set remote controller
communication channel(p. 24)
Key Display
Grade direction
Ø
Ø
To Next Page
Loading...
Need help?
General
