Setup Guide TOPCON Apollo FSO - Single Liquid - Section Control
Doc. No. MAN0034 P 8 / 28
Revision. A Rev. Date 18/01/2022
The implement should be configured with:
IMPLEMENT CONTROL: Section Control and Rate Control
ECU TYPE: Apollo
IMPLEMENT FUNCTION: Seeder
ECUs: CM40 and EM-24
At least 1 Liquid Boom and 1 liquid tank need to be created.
Ensure the EM-24 is not connected to the CM-40 ‘comms’ port while the system detects the
first ECU. Once the CM-40 has been detected, select the Add ECU icon, remove dust cap and
connect the CAN line to the EM-24 ‘comms’ port.
To Next Page
Loading...
